KN-32 Wireless Door Sensor

Home » Products » Wireless Alarm System » KN-32 Wireless Door Sensor
KN-32 Wireless Door Sensor

Brief Introduction
1. This KN-32 wireless door sensor is designed with wireless transmission structure, suitable for mounting on the aluminum alloy doors easily.
2. It makes full use of the magnetically controlled switch structured by reed pipe.
3. Its housing is made of excellent fire retardant materials.
4. The particularly designed appearance looks nice and elegant.

Technical Parameters

Working Voltage 12V (23A battery)
Current Consumption Static state ≤5μA, emission current ≤15mA
Working Temperature -10ºC~50ºC
Transmission Frequency 433MHz, 315MHz
Wireless Transmission Distance 100m
Built-in Battery 12V
Feedback Form
Other Products
  • KN-31 Wireless Door SensorCurrent: Static state ≤ 5μA; Emission current ≤15mA
    Transmission Frequency: 315MHz / 433.92MHz ±1MHZ
    Wireless Transmission Distance: >80m (linear distance at the spacious barrier free place.)4V
  • KN-51WS Gas DetectorWith different output methods including the NO, NC and level output, the networking signal will be used to start the exhaust fan.
    This product is suited to cooperate with most of the weak current control systems like burglar alarm, buildings intercom, remote transmission system for the signals of water meter, power meter and gas meter.
  • KN-52WS Smoke Alarm This KN-52WS smoke alarm is configured with the photoelectric infrared LED.
    Mounted on the ceiling, it will not give off the radioactive materials.
    It is optional that the product can send the status signals every 15s or 60s.
    This smoke alarm is able to send the signals of low power and power on reset.
  • KN-289 Alarm Control PanelCode matching function: This product is divided into 8 defense areas, capable of code matching with 8 probes and 8 remote controllers.
    Emergency calling: In the emergency circumstance, users can press the emergency button on the controller to send the signals for help.
  • KN-299 Alarm Control PanelAutomatic code matching: Through the wireless addresses, the device learns and matches the codes of ambient equipment automatically. With eight defense areas, it can match the codes of 32 probes and 4 remote controllers.
    Wireless connection: The detector and the product are connected wirelessly with 1 million address bits to avoid the signal interference at the same address and facilitate the expansion of address bits.