KN-880 Alarm Control Panel

Home » Products » Wireless Alarm System » KN-880 Alarm Control Panel
KN-880 Alarm Control Panel

Description
1. Configured with GSM module inside, the KN-880 alarm control panel needs no telephone line to report the following contents in short messages, namely the user code of current arming and disarming, the arming and disarming detection zone and time, the current alerting detection zone and the alarm types.
2. When the infrared detector with camera is selected, the on-site pictures can be sent to the designated phone, computer or E-mail of users automatically or by the users manually if needed.
3. The heartbeat detection between the product and the wireless detectors makes sure the reliable performance and the vandal resistant detection of ambient detectors.
4. This alarm control panel comes with a 4×4 keyboard and a LCD screen in Chinese, bringing convenience for programming.
5. With the standard Chinese voice recorded, this device offers warm audible prompt in the whole operation process and precise report of alarming information.
6. Our product owns four wired detection zones and eight wireless defense zones. It can be set with eight separate areas involving different overlapped detection zones. Each of the separate area is matched with its own controller and user password for independent arming and disarming. Two superior controllers with two superior passwords offer simultaneous operation for the eight separate areas. In addition, the hierarchical user password includes two superior passwords and eight ordinary user passwords.
7. Aside from the ganged with wired alarm, this device supports 5 groups of wireless signals linkage output. It offers cross control on 5 lines of wireless alarm, wireless lamp and other equipment at will.
8. Our alarm control panel is compatible with Ademco Contact ID communication protocol of alarm receiving center. With six groups of phone numbers stored inside, the product allows the flexible setting on communication mode, the detection zone for communication. It decides whether the arming or disarming operation and the systematic status information need communication or not.
9. When the telephone or mobile is got through the phone linked to the product remotely, users can accomplish the remote monitoring, arming, disarming, alarm recording at site and other operations.
10. The alarm control panel uses automatic code matching with the wireless detectors and remote controllers via learning the code first. It can encode 24 different detectors and learn the codes of about 10 controllers totally.
11. To be coupled with different wired detectors, this product supports flexible adjustment on the response speed of the wired detection zone from 100ms to 900ms. It can be set freely with optional circuits, namely the normally opened type, normally closed type and EOL or end of line type.
12. This alarm control panel comes with three periods of fixed time for automatic arming or disarming in different partitions separately.
13. The delay of alerting and arming is allowable within 0 to 250 seconds and the list of corresponding defense zones is freely arranged.
14. Our product will remind users of the disassembling operation, the alternating current failure, power shortage of backup battery and detector, disassembling of the detectors and other situations.
15. This alarm control panel can keep the latest 100 alarm messages in recode with the arming users and time, disarming users and time. The alarm situations and occurrence time will be kept in details and users can’t modify or delete the records.
16. With dual power supply, the product is powered by 220V alternating current and optional rechargeable battery. In the normal operation, the battery will be charged all the time. When the alternating current fails, it will be shifted automatically for supplying electricity, enabling the device to work standby for over 24 hours normally. Additionally, the product gives warning about the low voltage of the battery.

Feedback Form
Other Products
  • KN-01/02 Infrared DetectorIn the wireless structure, the KN-01 or the KN-02 infrared detector is convenient for installation and maintenance.
    This device features outstanding electricity conservation and smart analysis. It can work continuously for a longer time than other wireless products.
    In the fashionable and exquisite design, this product offers the nice and elegant appearance mounted ...
  • KN-06 Infrared DetectorDue to the fashionable and compact appearance, our product looks nice and elegant and is suitable for mounting in the house.
    It owns two processing channels for A/D datum and one processing channel for pulse signals via the digitalized processing technology. Its reliability and anti-jamming capacity are greatly increased.
  • KN-23 Remote ControlMax. current: ≤10mA
    Transmission Frequency: 315MHz / 433.92MHz ±1MHZ
    Wireless Transmission Distance: >80m (linear distance at the spacious barrier free place.)
  • KN-26 Remote ControlStandby Current: 0mA
    Max. Current: 10mA
    Wireless Frequency: 315MHz, 433.92MHz ±1MHZ
    Wireless Transmission Distance: >80m (linear distance at the spacious barrier free place.)
  • KN-32 Wireless Door Sensor This KN-32 wireless door sensor is designed with wireless transmission structure, suitable for mounting on the aluminum alloy doors easily.
    It makes full use of the magnetically controlled switch structured by reed pipe.
    Its housing is made of excellent fire retardant materials.