KN-798 Alarm Control Panel

Home » Products » Wireless Alarm System » KN-798 Alarm Control Panel
KN-798 Alarm Control Panel

Brief Introduction
1.The KN-798 alarm control panel offers warm voice prompt in Chinese in the operation and gives the report of alarm information precisely while alarming.
2. Due to the dot matrix LCD screen in Chinese with a 4×4 keyboard, the programming of the product becomes easier.
3. Aided with 8 wired and wireless detection zones respectively, users can distinguish the alerting situations in wired areas and wireless areas clearly.
4. The alarm control panel has 8 zones with corresponding codes and controllers. All the zones allow the overlapped setting of the lists of the detection zones crossly.
5. It makes use of the hierarchical passwords including the password of setters, the main code of the householder and the user passwords for 8 zones. The main code of users or the ordinary users password becomes the duress code by adding 9 to the last number.
6. Compatible with Ademco Contact ID communication protocol of alarm receiving center, this alarm control panel can remember six groups of telephone or cell phone numbers. Users can freely set the communication modes to each phone, select the defense zones for connection and determine whether the communication is needed for the arming or disarming operation and the systematic status information.
7. The automatic alarm for broken exterior telephone line or short circuit can be switched on or off.
8. Users can get the telephone or mobile connected to the phone linked to the product remotely, accomplishing the remote audio monitoring, recording, arming, disarming, alerting at site and other operations.
9. Our alarm control panel is able to learn and match the codes of wireless detectors and remote controllers automatically. As it can encode 5 different detectors in each wireless defense zone, 8 detection zones allow it to encode 40 distinguished detectors and learn the codes of 10 controllers.
10. The wired detection zone performs with adjustable response speed ranging from 50ms to 750ms. In order to match various wired detectors, this product is set with three types of optional circuits, namely the normally opened type, normally closed type and EOL or end of line type.
11. This alarm control panel supports two periods of fixed time setting for separate arming or disarming in different zones.
12. It is allowable to set freely about the delay of alerting and arming within 0 to 250 seconds, as well as the list of corresponding defense zones.
13. Due to the perfect self inspection, the product will alarm under the circumstance of the disassembling operation, the alternating current failure, telephone line stoppage, power shortage of backup battery and detector, disassembling and invalid operation of the detectors, which are our specially matched parts for the control panel.
14. This product is configured with 8 sets of wireless equipment or wireless alerting signal linkage mechanism. It supports the wired alarm signal output.
15. It can keep the latest 50 systematic messages or alarm records with specific time marked. The excessive recent records will be stored automatically to get rid of the earliest ones correspondently. It is unavailable for users to rectify or delete the records.
16. Our alarm control panel is able to remember the open or close status of the wireless detectors and give prompt.
17. It utilizes double power supply, namely the 220V alternating power and the storage battery. This product gets the battery charged in the normal status and will be powered by battery in automatic shift if the alternating current fails. In this way, it can generally keep standby operation over 24 hours. Aside from the warning of low battery voltage, the product adopts the circuit with overdischarge protection to avoid the possible damage.

Technical Parameters
Operating Voltage: AC 220V±15% DC12V/7Ah
Working Environment: -10ºC ~ +55ºC
Relative Humidity: 40%~70%
Wireless Receiving Frequency: 433.92MHz
Emission Distance: ≥200m (433.92MHz)
Auxiliary Current: ≤200mA
Alarm Loudness: ≥80dB within 1m
Overall Size: 215mm×160mm×57mm
Communication Distance between the Warning Signal and the Host Machine: ≥200m (spacious place)
Distance between Remote Controller and Host Machine: ≥100m (spacious place)
Auxiliary Current Output: ≤550mA (with the battery)
Warning Signal Output Current: 0.75A
Overall Dimensions: 264mm(L)×260mm (W)×80mm(H)
Weight: 5.4kg (batteries included)

Feedback Form
Other Products
  • KN-01/02 Infrared DetectorIn the wireless structure, the KN-01 or the KN-02 infrared detector is convenient for installation and maintenance.
    This device features outstanding electricity conservation and smart analysis. It can work continuously for a longer time than other wireless products.
    In the fashionable and exquisite design, this product offers the nice and elegant appearance mounted ...
  • KN-799 Alarm Control PanelOur product is divided into 4 wired detection zones and 8 wireless detection zones clearly to present different alarm situations.
    The hierarchical passwords include a setter password, a main code of users and 8 groups of user passwords for different zones.
  • KN-688 Alarm Control PanelWired detection zones: Four wired emergency detection zones support the connection with wired detectors that are normally opened or closed.
    Intelligent detection zone: All the detection zones can be programmed as stand-alone standard detection zone, and the arming zone for 24 hours without disarming.
  • KN-699 Alarm Control PanelEmergency calling: The emergency button on the panel is used to activate the alarm to signal for help via dialing six groups of stored alerting telephone numbers.
    Wired detection zones: There are four wired emergency detection zones capable of connecting to diverse wired detectors that are normally opened or closed.
  • KN-880 Alarm Control PanelTo be coupled with different wired detectors, this product supports flexible adjustment on the response speed of the wired detection zone from 100ms to 900ms. It can be set freely with optional circuits, namely the normally opened type, normally closed type and EOL or end of line type.
    This alarm control panel comes with three periods of fixed time for automatic arming or disarming ...