KN-589 Alarm Control Panel

Home » Products » Wireless Alarm System » KN-589 Alarm Control Panel
KN-589 Alarm Control Panel

Product Introduction
1.Telephone alarm: This KN-589 alarm control panel is stored with six telephones for automatic alarming system to notice the users on their cell phone and fixed telephone, the alarm receiving center, etc.
2. Automatic code matching: The device will detect the address of the ambient equipment for automatic code matching. It has eight defense areas and it can learn and match the codes of 32 probes and 4 remote controllers.
3. Wireless connection: With 1 million address bits stored, the alarm control panel is connected to the detectors wirelessly to prevent the signal interference at same address. Moreover, it is easy to expand the storage capacity of addresses.
4. Remote control: This product supports the remote control of phones, such as the remote audible monitoring, alarm signals sending, live recording, record playback, remote arming and disarming, silenced alarm and so on.
5. Emergency calling: In the emergent conditions, users can press the emergency button on the controller and the device will dial six sets of alerting numbers stored in advance for help.
6. Wired defense area: This alarm control panel is equipped with four wired emergency defense areas, which can be connected to various wired detectors or emergency buttons.
7. Intelligent defense area: The eight defense areas of the product can be programmed separately as standard defense area, welcome doorbell and arming zones for users are at home or not. This device is also set with another two irrevocable arming zones for 24 hours service.
8. Intelligent identification: The alarm control panel can identify different signals sent by various sensors and distinguish different levels of alarm situations automatically, such as the low level situations where the IR probe and door sensor are detected, the high level situations through identifying the smoke and coal gas. When it receives the signals of sensors about the coal gas, smoke or flame and so on, this product will send the alarm signals.
9. Doorbell function: Due to the door sensor that can be commonly used as doorbell, users can choose to use the doorbell function or door sensor function through dialing the codes on the door sensor without resetting the device any more.
10. Power failure protection: The preset functions are available in normal performance even the power fails.
11. Information indication: The alarm control panel is mounted with a range of LED lights for displaying the alarm defense area and indicating the alerting, low voltage of battery, telephone line disconnection, recording, alternating current failure, arming modes when users are at home or not. All the operation circumstance is clearly shown.
12. Alarm priority: If the telephone line is busy in calling or receiving calls when something abnormal happens, the device will give priority in alerting.
13. Audible alarm: Users can record the audible alerting content of 20 seconds in advance. The product is able to play the audible document automatically in the telephone alerting.
14. Information protection: Any modification on the information can be accomplished through the password authorization.
15. Power supply: The built-in batteries facilitate the normal operation of the system for 24 hours if the power failure happens.
16. Networking support: The product can be connected to the 110 police center through networking.

Technical Parameters
Supply Voltage: AC 187-242V DC 9-15V
Quiescent Current: ≤50mA
Warning Current: ≤250mA
Received Frequency: 315MHz, 433.92MHz
Reserve Power Supply: Optional 1.2V×8 rechargeable batteries
Alarm Loudness: ≥80dB within 1m
Dial Mode: Dual audio frequency dial
Dialing Parameters: -7±2dBM (high frequency cluster electrical level), -9±2dBM (low frequency cluster electrical level)
Operating Temperature: -10ºC~50ºC
Working Humidity: <80%
Size of Main Machine: 143×148×43mm

Feedback Form
Other Products
  • KN-599 Alarm Control PanelSmart identification: This product is capable of automatically identifying the signals of diversified sensors and distinguishing the low alerting situations like IR detector and door sensor, the high level of alarm situations like smoke, coal gas and so on. If receiving the signals of coal gas, smoke, fire and other high level alarm situations, the product will signal the alarm in spite of in armed or disarmed modes.
  • KN-798 Alarm Control PanelDue to the dot matrix LCD screen in Chinese with a 4×4 keyboard, the programming of the product becomes easier.
    Aided with 8 wired and wireless detection zones respectively, users can distinguish the alerting situations in wired areas and wireless areas clearly.
    The alarm control panel has 8 zones with corresponding codes and controllers.
  • KN-799 Alarm Control PanelOur product is divided into 4 wired detection zones and 8 wireless detection zones clearly to present different alarm situations.
    The hierarchical passwords include a setter password, a main code of users and 8 groups of user passwords for different zones.
  • KN-688 Alarm Control PanelWired detection zones: Four wired emergency detection zones support the connection with wired detectors that are normally opened or closed.
    Intelligent detection zone: All the detection zones can be programmed as stand-alone standard detection zone, and the arming zone for 24 hours without disarming.
  • KN-699 Alarm Control PanelEmergency calling: The emergency button on the panel is used to activate the alarm to signal for help via dialing six groups of stored alerting telephone numbers.
    Wired detection zones: There are four wired emergency detection zones capable of connecting to diverse wired detectors that are normally opened or closed.