KN-299 Alarm Control Panel

Home » Products » Wireless Alarm System » KN-299 Alarm Control Panel
KN-299 Alarm Control Panel

Product Introduction
1. Telephone alarm: This KN-299 alarm control panel offers six telephones for automatic alarm, calling the cell phone and fixed line of users, the alarm receiving center, etc.
2. Automatic code matching: Through the wireless addresses, the device learns and matches the codes of ambient equipment automatically. With eight defense areas, it can match the codes of 32 probes and 4 remote controllers.
3. Wireless connection: The detector and the product are connected wirelessly with 1 million address bits to avoid the signal interference at the same address and facilitate the expansion of address bits.
4. Remote control: After getting through the phone of users, the alarm control panel offers remote sound monitoring, alarm signal sending, remote arming and disarming, mute mode setting and other control for the alarm device.
5. Emergency calling: When something emergent happens, users can press the emergency key on the remote controller and the alarm will dial the six sets of preset phone numbers for help.
6. Intelligent defense areas: The eight defense areas on the panel can be separately programmed as the home defense area, standard defense area, welcome doorbell, the irrevocable defense area within 24 hours and the special defense area for the situation that nobody is at home.
7. Smart identification: The alarm control panel is able to identify different signals sent by various sensors and automatically distinguish different levels of alarm situations, such as the low level situations where the IR probe and door sensor are detected, the high level situations of identifying the smoke and coal gas. Once it receives the signals of sensors about the coal gas, smoke, fire and so on, this product will send the alarm signals.
8. Doorbell function: The product has the general functions of working as the door sensor and doorbell. Through dialing the code on the door sensor, users can confirm that it is used as the door sensor or doorbell easily without any reset on the device.
9. Power failure protection: The preset functions of the product will be not included by power failure.
10. Information indication: Our alarm control panel is collocated with LED indication lamp, alarmed defense area display light, alarm indication lamp, the arming indication lights for the modes of users at home or not separately, the alternating current failure indication light, etc. The working state of all parts is seen clearly.
11. Alarm priority: No matter when the phone line is busy, the device will alarm first.
12. Information protection: Any alternation on the information has to be done through the password authentication.
13. Power supply: The internally mounted batteries are used to ensure the 24 hours of normal operation of the system against power failure.
14. Operation on phone: Through the number and function keys similar to that of phones, all kinds of functions of the alarm control panel can be set smoothly.

Technical Parameters
Supply VoltageAC 187-242V, DC9-15V
Quiescent Current≤50mA
Warning Current≤250mA
Received Frequency315MHz, 433.92MHz
Reserve Power SupplyOptional 1.2V×8 rechargeable batteries
Alarm Loudness≥80dB within 1m
Wireless Operating Frequency315MHz, 433.92MHz
Dial ModeDual audio frequency dial
Dialing Parameters-7±2dBM (high frequency cluster electrical level), -9±2dBM (low frequency cluster electrical level)
Operating Temperature-10ºC~50ºC
Working Humidity<80%
Overall Dimension143×148×43mm
Feedback Form
Other Products
  • KN-589 Alarm Control PanelEmergency calling: In the emergent conditions, users can press the emergency button on the controller and the device will dial six sets of alerting numbers stored in advance for help.
    Wired defense area: This alarm control panel is equipped with four wired emergency defense areas, which can be connected to various wired detectors or emergency buttons.
  • KN-599 Alarm Control PanelSmart identification: This product is capable of automatically identifying the signals of diversified sensors and distinguishing the low alerting situations like IR detector and door sensor, the high level of alarm situations like smoke, coal gas and so on. If receiving the signals of coal gas, smoke, fire and other high level alarm situations, the product will signal the alarm in spite of in armed or disarmed modes.
  • KN-798 Alarm Control PanelDue to the dot matrix LCD screen in Chinese with a 4×4 keyboard, the programming of the product becomes easier.
    Aided with 8 wired and wireless detection zones respectively, users can distinguish the alerting situations in wired areas and wireless areas clearly.
    The alarm control panel has 8 zones with corresponding codes and controllers.
  • KN-799 Alarm Control PanelOur product is divided into 4 wired detection zones and 8 wireless detection zones clearly to present different alarm situations.
    The hierarchical passwords include a setter password, a main code of users and 8 groups of user passwords for different zones.